Panels for electrical distribution

Control panels

Surge protection

Road / tunnel lighting

Elevators and lifts

Type 7P.01 surge arresters, SPD Type 1 + 2, varistor + GDT single pole usable in single phase or three phase applications (230/400 V AC). 
Combination of varistor and gas spark gap, with visual signaling and with remote contact of the state of the varistor/GDT. Upside down mount technology. 
Replaceable modules.
Features include:
<ul>
<li>SPD suitable for low voltage systems for protection against overvoltages caused by direct discharges, induced and operating overvoltages</li>
<li>To be installed on the border between zones LPZ 0 and LPZ 1</li>
<li>Combination of high-performance varistors and gas spark gaps (GDT) which ensure: 
• high discharge currents 
• high insulation resistance which eliminates the 
leakage current 
• absence of subsequent follow-on current</li>
<li>Extremely low residual voltage</li>
<li>Replaceable modules</li>
<li>Upside down mount technology (thanks to the double marking of the terminals and the new restraint system of the replaceable module that allows its reversal)</li>
<li>Visual indicator of the varistor status: functional/to be replaced</li>
<li>Double screw terminal</li>
<li>Signaling with remote contact of the varistor status: presence, functioning, to be replaced</li>
<li>Connector (07P.01) included in the package</li>
<li>In accordance with EN 61 643-11</li>
<li>35 mm rail (EN 60715) mounting, 36 mm per pole</li>
</ul>

Function and features:

EurAsian Conformity (EAC)

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung

Servimeters

Report

Technical Datasheet

Instruction manuals

KNX Manual

Toolbox user manual

Communication protocol

Solutions for electrical panels and industrial automation

Soluciones industriales y productos automatizacion industrial

Soluzioni per il quadro elettrico e l'automazione industriale

Produse pentru tablouri electrice si automatizari industriale

Brochure

Selection guide

Catalogs

Other

UKCA 7P.XX.8 Series - Surge Protection Devices

Declaration of conformity

Guide

Software

3D files

DXF files

Type 7P.01 - Surge Protection Device (SPD) | Finder

robots

index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1

googlebot

bingbot

https://www.findernet.com/en/india/series/7p-series-surge-protection-devices-spd/type/type-7p01-surge-protection-device-spd/

twitter:card

twitter:creator

twitter:site

Finder S.p.A.

Type 7P.01 surge arresters, SPD Type 1 + 2, varistor + GDT single pole usable in single phase or three phase applications (230/400 V AC). Combination of varistor and gas spark gap, with visual signaling and with remote contact of the state of the varistor/GDT. Upside down mount technology. Replaceable modules. Features include:  SPD suitable for low voltage systems for protection against overvoltages caused by direct discharges, induced and operating overvoltages To be installed on the border between zones LPZ 0 and LPZ 1 Combination of high-performance varistors and gas spark gaps (GDT) which ensure: • high discharge currents • high insulation resistance which eliminates the leakage current • absence of subsequent follow-on current Extremely low residual voltage Replaceable modules Upside down mount technology (thanks to the double marking of the terminals and the new restraint system of the replaceable module that allows its reversal) Visual indicator of the varistor status: functional/to be replaced Double screw terminal Signaling with remote contact of the varistor status: presence, functioning, to be replaced Connector (07P.01) included in the package In accordance with EN 61 643-11 35 mm rail (EN 60715) mounting, 36 mm per pole

Type 7P.01 - Surge Protection Device (SPD)

Finder » Type 7P.01 – Surge Protection Device (SPD) Comments Feed

WPML ver:4.6.10 stt:74,75,68,79,94,98,99,73,100,101,76,77,102,80,83,103,84,85,104,105,106,108,95,96,65,67,86,113,92,97,69,78,82,66,114,71,87,88,72,89,90,91,107,93,115,81;

generator

https://cdn.findernet.com/app/uploads/2020/03/24151526/7P01-surge-protection-device-768x768.png

Type 7P.01 surge arresters, SPD Type 1 + 2, varistor + GDT single pole usable in single phase or three phase applications (230/400 V AC).
Combination of varistor and gas spark gap, with visual signaling and with remote contact of the state of the varistor/GDT. Upside down mount technology.
Replaceable modules.
Features include:

SPD suitable for low voltage systems for protection against overvoltages caused by direct discharges, induced and operating overvoltages
To be installed on the border between zones LPZ 0 and LPZ 1
Combination of high-performance varistors and gas spark gaps (GDT) which ensure:
• high discharge currents
• high insulation resistance which eliminates the
leakage current
• absence of subsequent follow-on current
Extremely low residual voltage
Replaceable modules
Upside down mount technology (thanks to the double marking of the terminals and the new restraint system of the replaceable module that allows its reversal)
Visual indicator of the varistor status: functional/to be replaced
Double screw terminal
Signaling with remote contact of the varistor status: presence, functioning, to be replaced
Connector (07P.01) included in the package
In accordance with EN 61 643-11
35 mm rail (EN 60715) mounting, 36 mm per pole



4R4pEF9LPm66sZ51r_mEN4l2pAfDTpiRB7F64HY_mhY

google-site-verification

facebook-domain-verification

Elettrospecialisti

Punto Luce

Emme Bi Store

Elco

Elettronew

7P Series - Surge Protection Devices (SPD)

Single phase (1 varistor + 1 spark gap) Type 3, DIN rail mounting 

255 V Max (U ) for SPD Type 1, N+PE (7P.09)

260 V Max (U ) for SPD Type 1+ 2 (for U = 230-240 V AC)

275 V Max for SPD Type 1 “Low Up”, Type 2 (Uc) (for UN = 230-240 V AC) and Type 3