Power generators

Back-up generators

Pump control

Disabled lift

Inverter

<p>Type 67.22 Power relays -x300 for photovoltaic applications 50 A 2 NO for PCB mount, distance between open contacts ≥ 3 mm</p>
<p>Features include</p>
<ul>
<li>Distance between open contacts ≥ 3 mm, in accordance with VDE 0126-1-1, EN 62109-1, EN 62109-2</li>
<li>DC coil, with holding power of only 170 mW</li>
<li>Reinforced insulation between coil and contacts</li>
<li>1.5 mm distance between relay base and printed circuit board</li>
<li>Usable in ambient temperatures up to 85 ° C (coil in energy saving mode) or 70 ° C (coil in standard mode)</li>
<li>Meets the requirements of the EN 60335-1 standard relating to heat and fire resistance (GWIT 775 ° C and GWFI 850 ° C)</li>
<li>Cadmium-free contacts:</li>
<li>AgNi version (for applications where low contact resistance is required)</li>
<li>AgSnO2 version (for applications where there is a high inrush current)</li>
</ul>


Function and features

EurAsian Conformity (EAC)

cURus

UL RECOGNIZED

ENEC

European Norms Electrical Certification (ENEC)

Report

Technical Datasheet

Instruction manuals

Toolbox user manual

Communication protocol

Solutions for electrical panels and industrial automation

Soluciones industriales y productos automatizacion industrial

Soluzioni per il quadro elettrico e l'automazione industriale

Brochure

Selection guide

Catalogs

Other

Declaration of conformity

Guide

Software

3D files

DXF files

robots

index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1

googlebot

bingbot

https://www.findernet.com/en/bosnia-and-herzegovina/series/67-series-high-power-relays-50a/type/type-6722-power-relay-50a/

twitter:card

twitter:creator

twitter:site

Finder S.p.A.

Type 67.22 Power relays -x300 for photovoltaic applications 50 A 2 NO for PCB mount, distance between open contacts ≥ 3 mm Features include  Distance between open contacts ≥ 3 mm, in accordance with VDE 0126-1-1, EN 62109-1, EN 62109-2 DC coil, with holding power of only 170 mW Reinforced insulation between coil and contacts 1.5 mm distance between relay base and printed circuit board Usable in ambient temperatures up to 85 ° C (coil in energy saving mode) or 70 ° C (coil in standard mode) Meets the requirements of the EN 60335-1 standard relating to heat and fire resistance (GWIT 775 ° C and GWFI 850 ° C) Cadmium-free contacts: AgNi version (for applications where low contact resistance is required) AgSnO2 version (for applications where there is a high inrush current)

Type 67.22 - Power relay 50A

WPML ver:4.3.16 stt:74,75,68,79,94,98,99,73,100,101,76,77,102,80,83,103,84,85,104,105,106,108,95,96,65,67,86,113,92,97,69,78,82,66,114,71,87,88,72,89,90,91,107,93,115,81;

generator

https://cdn.findernet.com/app/uploads/2020/03/25115124/6722-power-relay-for-photovoltaic-applications-768x768.png

Type 67.22 Power relays -x300 for photovoltaic applications 50 A 2 NO for PCB mount, distance between open contacts ≥ 3 mm
Features include

Distance between open contacts ≥ 3 mm, in accordance with VDE 0126-1-1, EN 62109-1, EN 62109-2
DC coil, with holding power of only 170 mW
Reinforced insulation between coil and contacts
1.5 mm distance between relay base and printed circuit board
Usable in ambient temperatures up to 85 ° C (coil in energy saving mode) or 70 ° C (coil in standard mode)
Meets the requirements of the EN 60335-1 standard relating to heat and fire resistance (GWIT 775 ° C and GWFI 850 ° C)
Cadmium-free contacts:
AgNi version (for applications where low contact resistance is required)
AgSnO2 version (for applications where there is a high inrush current)



4R4pEF9LPm66sZ51r_mEN4l2pAfDTpiRB7F64HY_mhY

google-site-verification

facebook-domain-verification

Elettrospecialisti

Punto Luce

Emme Bi Store

Elco

Elettronew

67 Series - High power relays 50A

Single PCB terminals, 1.5 mm gap between PCB and relay base

WHERE CAN I BUY FINDER PRODUCTS?

Find an authorized Finder dealer near you:

Contact Us

Do you need technical or commercial support?

google_play

apple_store

Explore Finder

Default Confirmation

Enter consent agreement text here.  The Consent Field will store this agreement text with the form entry in order to track what the user has consented to.

Admin Notification

New submission from {form_title}

Newsletter Subscribe