Explore finder

The Finder 6-contact KNX actuator for home and building automation

PRODUCT FOCUS

KNX is today the dominent worldwide open standard facilitating the automation and decentralized management of technological systems within a wide range of structures such as commercial and industrial buildings, offices, homes, public places, schools and others.

In fact, the KNX system has become an integral part of the conceptual trend of the majority of advanced buildings. Typically being used for a plethora of tasks from lighting management, shutter control, alarm and video surveillance, heating, ventilation and air conditioning monitoring and control… to water control, energy optimization, meter management, control of household appliances and audio systems.

Use of the KNX system is a valid proposition for both new and existing buildings; improving comfort and safety and significantly contributing to energy savings – wherever it is used.

The Finder KNX range consists of power supplies, USB and universal interfaces, movement and presence detectors, dimmers and actuators.

Type 19.6K - Switching actuator with KNX technology

Finder’s 19.6K KNX actuator is a compact and powerful 16 A device, with 6 individually configurable NO or NC contacts.

It comprises ENEC approved bistable relays, has LED indicators for each output and logic gates for each channel. It provides for switching and timings such as ON, OFF, Intermittence, OFF delay, and Staircase lighting functions.

The actuator mounts on a 35mm rail, is powered via the KNX bus and allows the management of scenarios. And, with all its features this device will also deliver durability and versatility in use and throughout its life.

How to install

Here is the procedure for installing and configuring the Finder KNX 19.6K actuator.

1-Connect the product to the KNX network via a dedicated terminal.

2- Provide the physical address to the device.

3- Associate the device with the functional parts of the KNX system that are of interest to you.

4. Download the application program on the various devices of the KNX system

5.The system is ready for use

“In the production of the Finder KNX actuator, AgSn02 material is used for the relay contacts. This is to ensure the contacts can handle a maximum inrush current of 120 A for 5ms, all of which results in the highest reliability even when switching high inrush current loads typical of modern LED lighting and electronic transformers. “

Davide Valenti – Finder’s IoT specialist

RELATED PRODUCTS
19.6K
TYPE
PREV
NEW TYPE 70.61 THREE-PHASE VOLTAGE MONITORING RELAY
NEXT
SELECTION GUIDE FOR THE FINDER 15 SERIES DIMMERS – WHICH DIMMER SHOULD YOU USE TO MEET YOUR NEEDS?